DESCRIPTION
The Line Impedance Stabilization Networks (LISNs) models LI-115, LI-210 and LI-215 are utilized during single phase conducted emissions testing per FCC, CISPR and European norms.

LI-215 Specs:
▪ Frequency range: 10 kHz - 30 MHz
▪ Lines + Ground: 2
▪ Max. Current: 15 Amps
▪ Max. Voltage: 125 V AC line to ground
▪ Inductance: 50 H / 250 H
▪ Inductor type: Air core
▪ Ouput Impedance: 50 Ω
▪ RF Output Connector: N female
▪ Power source frequency: DC - 60 Hz
▪ Power in connector: IEC Power Inlet
▪ Power out connector: NEMA
▪ Weight: 20 lbs / 9 kg
▪ Size (L x W x H): 14 x 7 x 7 inches; 35.5 x17.8x17.8cm
▪ Meets the impedance requirements called out in these specifications
▪ Single phase power applications require two LISNs and these models offer the convenience of having two LISNs in a single enclosure
▪ Power source may be either AC or DC with current ratings up to 15 A (please see specifications above)
▪ Line to be tested can be selected using the switch located on the front panel.
▪ Aluminum enclosure minimizes radio frequency interference which can compromise test results.
▪ All LISNs manufactured by Com-Power use air-core coils to prevent saturation and permeability variation to provide stable performance over time
▪ Bottom mounting plate of the LISN is conductive, so that it can be electrically bonded to the ground plane during the test
▪ An optional Transient limiter (model HZ-560) is available to protect the Spectrum Analyzer input during the test

New

Call Now
	877-667-6044 / 214-348-8800

  RFI / EMI Equipment

Why Tucker