DESCRIPTION
Line impedance stabilization networks (LISNs) are utilized during conducted emissions as well as susceptibility testing. They are specified in the EMI test requirements of various regulatory agencies, such as FCC, CISPR, FAA and DOD. Com-Power manufactures a line of LISNs which meet most specifications required by these agencies. One LISN is required for each line.

Li-150 Specs:
▪ Frequency range: 150 kHz - 30 MHz
▪ Lines + Ground: 2
▪ Max. Current: 50 Amps
▪ Max. Voltage: 270 V AC / 300 VDC
▪ Inductance: 50 H
▪ Inductor type: Air core
▪ Ouput Impedance: 50 Ω
▪ RF Output Connector: N female
▪ Power source frequency: DC - 60 Hz
▪ Power in connector: Superior plug
▪ Power out connector: Superior plug
▪ Weight: 18 lbs / 8.1 kg
▪ Size (L x W x H): 15 x 10 x 10 inches; 38x25.4x25.4 cm
▪ Each line is separated by an aluminum enclosure which minimizes RF interference, facilitates line isolation and provides user flexibility to choose any number of lines depending on number of phases
▪ Standard models are supplied as a pair of LISNs for two wire applications.
▪ Uses air-core coils to prevent saturation and permeability variation to provide stable performance over time
▪ Bottom mounting plate of the LISN has an unpainted, conductive surface to electrically bond to the ground plane during the test
▪ Individually calibrated to verify correct impedance

New

Call Now
	877-667-6044 / 214-348-8800

  RFI / EMI Equipment

Why Tucker