DESCRIPTION
The Tuned Dipole set model AD-100 is a standard antenna set which operates in the frequency range of 30 MHz to 1000 MHz for E-Field measurements.

▪ Antenna Type: Half wave tuned dipole
▪ Frequency Range: Balun 1 (dB1): 30 MHz - 65 MHz; Balun 2 (dB2): 65 MHz - 175 MHz; Balun 3 (dB3): 175 MHz - 400 MHz; Balun 4 (dB4): 400 MHz - 1000 MHz
▪ Impedance: 50 Ohm
▪ Connector Type: BNC female
▪ Element length assembled: min: 6 inches, 15 cm max: 212 inches, 538 cm
▪ Weight: 8 lbs, 36 kg
▪ Set consists of four baluns
▪ Designed according to American National Standard for Calibration of Antennas for Radiated Emissions in Electromagnetic Interference (EMI) Control C63.5
▪ Dipoles can be tuned to any frequency by selecting the balun for that frequency and adjusting the length of antenna elements to the half wavelength (calculated by 3x108/frequency in MHz/2)
▪ Length can be achieved by attaching together pairs of fixed and adjustable elements (lower frequencies) or a pair of adjustable elements (higher frequencies) to each side of the antenna balun.
▪ Fixed length elements were designed to minimize drooping, especially at low frequencies where the tuned dipole elements are long
▪ Dipoles are shipped with typical calibration data, which is included in the manual
▪ Dipole set can be individually calibrated upon request
▪ Antenna set includes a custom carrying case

Standard Configuration:
▪ Four antenna baluns
▪ Four fixed length extension rods
▪ Two low frequency adjustable elements
▪ Two medium frequency adjustable elements
▪ Balun 1 base drilled to accept 1/4" x 20 threads
▪ Typical calibration data in the manual

OPTIONS
• Clamp block (ATC-001) for tripod mounting
• Individual calibration data & certificate

New

Call Now
	877-667-6044 / 214-348-8800

  RFI / EMI Equipment

Why Tucker