DESCRIPTION
OUT-OF-SIGHT OSCILLATOR! Try this on for size. Have you been looking for a small, inexpensive, low distortion audio oscillator? Your search has ended, look no further. Tucker Electronics has just the oscillator to fit your shop and your budget. The GenRad 1310A oscillator is being offered at the super low price of only $279.00. FREQUENCY: The 1310A sports a 2 Hz to 2 MHz frequency range. Six decade ranges give you a wide selection of frequencies to help with any project you have undertaken. The accuracy of the selected frequency is ±2% of dial reading. After a one minute warm-up the drift is < 0.001%. The 1310A can also be phase-locked to an external frequency standard via a phone jack. This allows you to deliver a high-level standard frequency with adjustable amplitude and low distortion. OUTPUT: The rated output power of the GenRad 1310A is 160 mW into 600½, but you are not limited to this impedance. Because the distortion is independent of load it can equally be useful at 50½. It delivers over 20 V into an open circuit. The output is adjustable over the whole range by use of a continuously adjustable attenuator on the front panel. DISTORTION: The distortion is rated at < 0.25% from 50 Hz to 50 kHz, but typically falls below 0.1 in the 50 Hz to 10 kHz range. Hum is < 0.02%. LIGHTWEIGHT, BUT RUGGED Since the GenRad 1310A has all solid state circuitry, it makes a rugged and reliable source of output power. This also makes the 1310A small (8 1/2 x 6 x 8 1/2 inches) in dimensions, and lightweight (< 8 pounds). This attractive little instrument will be a welcome addition to your lab. READY TO GO! The GenRad 1310A is shipped to you, ready to go! Comes equipped with power cord, spare fuses, operators and service manual, 90-day warranty on parts and labor, plus Tucker's 10-day unconditional guarantee. All for just $279.00. Now that's out-of-sight!

Refurbished

Call Now
	877-667-6044 / 214-348-8800

  Function Gens & Waveform Synth

Why Tucker